Products
Composites
Designed for the reinforced plastic market and its various applications such as laminates in general, bodyworks, cultured marble, polymer concrete, buttons, translucent laminate, among other articles reinforced with fiberglass applied with spray or manual systems and catalyzed according to specification. Diseñados para el mercado de plástico reforzado y sus diversas aplicaciones como laminados en general, tractopartes, mármol sintético, concreto polimérico, botones, lamina traslucida entre otros artículos reforzados con fibra de vidrio aplicados con sistemas de aspersión o manual y catalizados según especificación.
PCP-9407-05
Unsaturated, hybrid, pre-accelerated polyester resins, fast release cycles, outstanding mechanical strength, excellent wetting of mineral fillers and fiberglass. They are recommended in the manufacture of polymeric concrete boxes and lids.
PCP-9407-07
Unsaturated, hybrid, pre-accelerated polyester resins, fast release cycles, outstanding mechanical strength, excellent wetting of mineral fillers and fiberglass. They are recommended in the manufacture of polymeric concrete boxes and lids.
PCP-9652
It is an unsaturated polyester resins, hybrid, fast release cycles and low viscosity.They are recommended in the manufacture of polymeric concrete boxes and lids.
PIP-6000
Promoted Isophthalic Unsaturated Polyester Resin with excellent mechanical properties, manufactured with materials compliant with the FDA 21 CFR 175.330 norm. Developed for fuel tank manufacturing (Hand lay-up and spray-up processes) and mold manufacturing
PIPD-51225
Unsaturated, isophthalic, pre-accelerated, thixotropic polyester resin, outstanding fibergalss wetting, complies with FDA regulation 21 CFR 177 2420. It is used in the manufacture of tractor parts, where manual or spray molding processes are used.
PIPD-51725A
They are unsaturated, isophthalic, pre-accelerated, thixotropic polyester resins, outstanding fiberglass wtting, comply with UL 94 HB and FMVSS 302 standars. It is used for the manufacture of tractor parts, where manual or spray molding processes are used.
PIPD-51825
They are unsaturated, isophthalic, pre-accelerated, thixotropic polyester resins, outstanding fiberglass wtting, comply with UL 94 HB and FMVSS 302 standars. It is used for the manufacture of tractor parts, where manual or spray molding processes are used.
PIPM-5001
Unsaturated, isophthalic, pre-accelerated polyester rein, outstanding mechanical properties, low % shrinkage. It is recommended for mold making.
PIS-65
It is an unsaturated, isophthalic, non preaccelerated and non thixotropic polyester resin.It is formulated for the manufactured of fiberglass reinforced parts, where manual or spray molding processes are used.
PMS-695
Orthophthalic resins, pre-accelerated, high vicosity, good wtting of mineral loads, low color in the final pice. It is used in the manufacture of sinks, plates, walls and bathtubs,where manual processes are used.
PMS-6952
Orthophthalic resins, pre-accelerated, high vicosity, good wtting of mineral loads, low color in the final pice. It is used in the manufacture of sinks, plates, walls and bathtubs,where manual processes are used.
PMS-7000
Orthophthalic resins, pre-accelerated, high vicosity, good wtting of mineral loads, low color in the final pice. It is used in the manufacture of sinks, plates, walls and bathtubs,where manual processes are used.
PMS-7030
Unsaturated polyester, orthophthalic, low viscosity, good wetting to mineral loads, pink color in liquid, low color in final piece. It is used in the manufacture of sinks, plates, walls and bathtubs, where manual processes are used.
PMS-7093
They are unsaturated, hybrid, pre-accelerated polyester resins, low viscosity, outstanding wtting to mineral loads and fast release cycles. Formulated for the manufacture of sinks and plates in series, where automated processes are used (special equipament to heat the resin and mix loads).
PMS-7095
Unsaturated polyester resins, hybrids, pre accelerated, low viscosity, demolding cycles moderately long, outstanding wetting to mineral loads. Recommended for the manufacture of sinks, plates, walls and bathtubs, where manual processes are used.
PMS-7098
They are unsaturated, hybrid, pre accelerated polyester resins, low viscosity, outstanding wetting to mineral loads and fast release cycles. Formulated for the manufacture of sinks and plates in series, where automated processes are used (special equipament to heat the resin and mix the loads).
PMS-7106
They are unsaturated, hybrid, pre accelerated polyester resins, low viscosity, outstanding wetting to mineral loads and fast release cycles. Formulated for the manufacture of sinks and plates in series, where automated processes are used (special equipament to heat the resin and mix the loads).
PMS-7099
They are unsaturated, hybrid, pre accelerated polyester resins, low viscosity, outstanding wetting to mineral loads and fast release cycles. Formulated for the manufacture of sinks and plates in series, where automated processes are used (special equipament to heat the resin and mix the loads).
PMS-7103
They are unsaturated, hybrid, pre accelerated polyester resins, low viscosity, outstanding wetting to mineral loads and fast release cycles. Formulated for the manufacture of sinks and plates in series, where automated processes are used (special equipament to heat the resin and mix the loads).
PMS-7104
Unsaturated polyester resins, hybrids, pre accelerated, low viscosity, demolding cycles moderately long, outstanding wetting to mineral loads. Recommended for the manufacture of sinks, plates, walls and bathtubs, where manual processes are used.
PMS-7107
These hybrid UPR resins, promoted with low viscocity, excellent filler wet out and fast demolding cycles. Formulated to manufacture counter tops and tabletops manufactured in continuous processes.
PPL-3212
They are unsaturated, orthophthalic, pre-accelerated polyester resin, resistance to yellowing, good hardness development. Formulated for the manufacture of translucet sheet by continuous process.
PPL-3214
Unsaturate polyester resin, orthopthalic, pre accelerated, resistance to yellowing, good development of hardness. For continuos lamination. Recommended in the manufacture of sheet translucent, where manual molding proccesses are used.
PPL-3215
They are unsaturated, orthophthalic, pre-accelerated polyester resin, resistance to yellowing, good hardness development. Formulated for the manufacture of translucet sheet by continuous process.
PPL-3216
Promoted Orthophtalic UPR with low color and good wet out properties. Formulated for translucent sheets made in continuous processes.
PPT – 4001
Unsaturated, hybrid, pre-accelerated, thixotropic polyester resins, without residual tack, rapid hardness development, good wetting of mineral fillers and fiberglass. They are used for the manufacture of fiberglass reinforced parts, where manual or spray molding processes are used.
PPT – 4015
They are unsaturated, hybrid, preaccelerated, thixotropic polyester resins, with no residual stickiness, good wetting to fiberglass, and good mechanical properties. They are used for the manufacture of fiberglass reinforced parts, where manual or spray molding processes are used.
PPT – 4020
They are unsaturated, hybrid, preaccelerated, thixotropic polyester resins, with no residual stickiness, good wetting to fiberglass, and good mechanical properties. They are used for the manufacture of fiberglass reinforced parts, where manual or spray molding processes are used.
PPT – 4032
They are unsaturated, hybrid, preaccelerated, thixotropic polyester resins, with no residual stickiness, good wetting to fiberglass, and good mechanical properties. They are used for the manufacture of fiberglass reinforced parts, where manual or spray molding processes are used.
PPT – 5535
Unsaturated, hybrid, pre-accelerated, thixotropic polyester resins, no residual tack, rapid hardness development, good wetting to fiberglass. They are used for the manufacture of fiberglass reinforced parts, where manual or spray molding processes are used.
PPT – 5536
Unsaturated polyester, hybrid, preaccelerated, thixotropic, excellent adherence to acrylic, rapid hardness development, validated according to ASTM C-297. Recommended for the fabrication of acrylic tubs and sinks where spray or hand molding processes are used.
PPT-5539
Unsaturated polyester, hybrid, preaccelerated, thixotropic, excellent adherence to acrylic, rapid hardness development, validated according to ASTM C-297. Recommended for the fabrication of acrylic tubs and sinks where spray or hand molding processes are used.
PPT-5540
Unsaturated polyester, hybrid, preaccelerated, thixotropic, excellent adherence to acrylic, rapid hardness development, validated according to ASTM C-297. Recommended for the fabrication of acrylic tubs and sinks where spray or hand molding processes are used.
PPT – 585
Unsaturated, hybrid, pre-accelerated, thixotropic polyester resins, no residual tack, rapid hardness development, good wetting to fiberglass. They are used for the manufacture of fiberglass reinforced parts, where manual or spray molding processes are used.
PPT – 5857
Unsaturated polyester, orthophthalic, preaccelerated, thixotropic, moderate residual tack release, excellent storage stability, good wetting to fiberglass. They are used for the manufacture of fiberglass reinforced parts, where manual or spray molding processes are used, and for the re-packaging of liters, gallons, buckets, etc.
PPT – 607
Unsaturated, hybrid, pre-accelerated, thixotropic polyester resins, no residual tack, rapid hardness development, good wetting to fiberglass. They are used for the manufacture of fiberglass reinforced parts, where manual or spray molding processes are used.
PPT-201-10
Unsaturated polyesters, modified terephthalics, preaccelerated, thixotropic, good mechanical properties, moderate residual tack release, comply with FMVSS 302 standard. They are used for the manufacture of fiberglass reinforced parts, where manual or spray molding processes are used.
PPT-201-15
Unsaturated polyesters, modified terephthalics, preaccelerated, thixotropic, good mechanical properties, moderate residual tack release, comply with FMVSS 302 standard. They are used for the manufacture of fiberglass reinforced parts, where manual or spray molding processes are used.
PPT-201-20
Unsaturated polyesters, modified terephthalics, preaccelerated, thixotropic, good mechanical properties, moderate residual tack release, comply with FMVSS 302 standard. They are used for the manufacture of fiberglass reinforced parts, where manual or spray molding processes are used.
PRA-675
It is an unsaturated, orthophthalic, preaccelerated polyester resin, low viscosity, good wetting to mineral loads, good sanding properties. Formulated for the manufacture of automotive filler.
PRA-6620
Unsaturated, orthophthalic, preaccelerated polyester resins, bleed-free, outstanding wetting to mineral fillers, excellent sanding properties. It is used for the manufacture of automotive filler.
PRA-6630
Unsaturated, orthophthalic, preaccelerated polyester resins, bleed-free, outstanding wetting to mineral fillers, excellent sanding properties. It is used for the manufacture of automotive filler.
PRA-6631
Unsaturated polyester, orthophthalic, preaccelerated, lower styrene monomer emission, bleed free, outstanding wetting to mineral fillers, excellent sanding properties. Recommended for the manufacture of automotive filler.
PRA-6632
Unsaturated, orthophthalic, preaccelerated polyester resins, bleed-free, outstanding wetting to mineral fillers, excellent sanding properties. It is used for the manufacture of automotive filler.
PRA-6634
Unsaturated polyester, orthophthalic, preaccelerated, lower styrene monomer emission, bleed free, outstanding wetting to mineral fillers, excellent sanding properties. Recommended for the manufacture of automotive filler.
PTM-8587
They are unsaturated, isophthalic, preaccelerated, non-thixotropic polyester resins, low viscosity, excellent wetting of mineral fillers and fiberglass, fast release cycles, excellent mechanical properties. Formulated for the manufacture of tractor parts, where closed molding processes (RTM or RTM Light) are used.
PTM-8588H
They are unsaturated, isophthalic, preaccelerated, non-thixotropic polyester resins, low viscosity, excellent wetting of mineral fillers and fiberglass, fast release cycles, excellent mechanical properties. Formulated for the manufacture of tractor parts, where closed molding processes (RTM or RTM Light) are used.
PTU-5103
Unsaturated polyester resin, modified terephthalic, non-preaccelerated, non-thixotropic, very good wetting to fiberglass, excellent mechanical properties. It is used in the manufacture of fiberglass pipes, through the filament winding process.
PUG-77
They are unsaturated, orthophthalic, non-preaccelerated and non-thixotropic polyester resins, high viscosity and solids, rapid development of hardness, good mechanical properties. They are recommended for the manufacture of fiberglass reinforced parts (manual or spray molding processes) and for decorative figures, where rapid curing is required.
PUG – 78F
They are unsaturated, orthophthalic, non-preaccelerated and non-thixotropic polyester resins, high viscosity and solids, rapid development of hardness, good mechanical properties. They are recommended for the manufacture of fiberglass reinforced parts (manual or spray molding processes) and for decorative figures, where rapid curing is required.
PUG-732
They are unsaturated, orthophthalic, non-preaccelerated and non-thixotropic polyester resins, high viscosity and solids, moderate hardness development, good mechanical properties. They are used for the manufacture of fiberglass reinforced parts, where manual or spray molding processes are used.
PUG-735
It is an unsaturated orthophthalic polyester resin, high solids, non-preaccelerated, non-thixotropic, high flexibility, good wetting of mineral fillers and fiberglass. Formulated to manufacture decorative figures, where high flexibility is required in final pieces.
PUG-800
They are unsaturated, orthophthalic, non-preaccelerated and non-thixotropic polyester resins, high viscosity and solids, moderate hardness development, good mechanical properties. They are used for the manufacture of fiberglass reinforced parts, where manual or spray molding processes are used.
PUG-4700
Unsaturated, hybrid, non-preaccelerated, non-thixotropic polyester, rapid hardness development, good wetting of mineral fillers and fiberglass. Recommended for formulating special UV-curable gel coats and manufacturing fiberglass-reinforced parts, where manual or spray molding processes are used.
PUG-4701
Unsaturated, hybrid, non-preaccelerated, non-thixotropic polyester, rapid hardness development, good wetting of mineral fillers and fiberglass. Recommended for formulating special UV-curable gel coats and manufacturing fiberglass-reinforced parts, where manual or spray molding processes are used.
PUG-7321
They are unsaturated, orthophthalic, non-preaccelerated and non-thixotropic polyester resins, high viscosity and solids, moderate hardness development, good mechanical properties. They are used for the manufacture of fiberglass reinforced parts, where manual or spray molding processes are used.
PUG-8002
They are unsaturated, orthophthalic, non-preaccelerated and non-thixotropic polyester resins, high viscosity and solids, rapid development of hardness, good mechanical properties. They are recommended for the manufacture of fiberglass reinforced parts (manual or spray molding processes) and for decorative figures, where rapid curing is required.
PUG-8004
They are unsaturated, orthophthalic, non-preaccelerated and non-thixotropic polyester resins, high viscosity and solids, rapid development of hardness, good mechanical properties. They are recommended for the manufacture of fiberglass reinforced parts (manual or spray molding processes) and for decorative figures, where rapid curing is required.
VRE-5513
These are General – Purpose Vinyl Ester resins with a medium reactivity, non- promoted and non-thixotropic, with excellent mechanical and chemical properties. Recommended for manufacturing FRP and tanks that require chemical resistance.
VRE-5521
These are General – Purpose Vinyl Ester resins with a medium reactivity, non- promoted and non-thixotropic, with excellent mechanical and chemical properties. Recommended for manufacturing FRP and tanks that require chemical resistance.
