Products
Gelcoats
Products developed for the composite materials industry; excellent application, good finish, gloss retention and resistance to dripping. Additionally, they are formulated to meet rigidity requirements in transportation, marine, and sanitary applications.
050-B-001
Orthophthalic white gel-coat, sanded, and of regular resistance to runoff. It is formulated to be used in the manufacture of fiberglass parts in open molding processes.
050-X-851
It is a neutral orthophthalic gel-coat, economical, sandable, and of regular resistance to runoff. Designed for the manufacture of sinks (caps) in serial processes (automated).
100-BA-001
White orthophthalic gel-coats, finishing, good resistance to runoff. They are formulated for use in the manufacture of fiberglass parts in open molding processes.
100-GA-001
It is a gray orthophthalic gel-coat, with a finish and good resistance to runoff. It is used in the manufacture of fiberglass parts in open molding processes.
100-NA-001
Black orthophthalic gel-coat, finishing, good resistance to runoff. Designed for use in the manufacture of fiberglass parts in open molding processes.
100-XB-002
It is a neutral orthophthalic gel-coat, with a finish and good resistance to runoff. Formulated to be used in the manufacture of fiberglass parts in open molding processes.
100-B-126
They are white orthophthalic gel-coats, with a finish, good hardness development, and comply with the requirements specified in the ANSI Z124.1,.2-1995, Sect. 6.1.1. They are used for the manufacture of washbasins and plates in serial processes (automated), in addition, for the manufacture of bathtubs.
150-B-005
White isophthalic gel-coat, sandable and good resistance to runoff. It is used in the manufacture of fiberglass parts in open molding processes.
150-G-305
They are gray isophthalic gel-coats, sandable and with good resistance to runoff. Formulated to be used in the manufacture of fiberglass parts in open molding processes.
200-A-001
Blue isophthalic gel-coats, paraffin-coated, without residual stickiness and good resistance to run-off. They are designed for use in the manufacture of fiberglass parts in open molding processes where it is required to cover the appearance of the fiberglass.
200-A-002
Blue isophthalic gel-coats, paraffin-coated, without residual stickiness and good resistance to run-off. They are designed for use in the manufacture of fiberglass parts in open molding processes where it is required to cover the appearance of the fiberglass.
200-B-020
It is a white isophthalic gel-coat, waxy, with no residual stickiness and good resistance to runoff. It is formulated for use in the manufacture of fiberglass parts in open molding processes where it is required to cover the appearance of the fiberglass.
200-S-071
White gel coat of good quality in its type. It provides a final finish with very good water resistance, good gloss retention, weathering and resilience. This gel coat is ready to use, has ease of application, resistance to runoff and fast curing. Contains UV absorbers for greater weather resistance.
200-B-113
They are white isophthalic gel-coats, for finishing, rapid development of hardness, good resistance to runoff, and they meet the requirements specified in the ANSI Z124.1,.2-1995, Sect. 6.1.1. They are recommended for the manufacture of sinks and plates in serial processes (automated), as well as for the manufacture of bathtubs.
200-B-114
It is a white isophthalic gel-coat, very good flexibility, for finishing. Specially designed for the manufacture of fiberglass panels, roofs, cabins, automotive vehicle parts in open molding processes.
200-B-115
They are white isophthalic gel-coats, for finishing, rapid development of hardness, good resistance to runoff, and they meet the requirements specified in the ANSI Z124.1,.2-1995, Sect. 6.1.1. They are recommended for the manufacture of sinks and plates in serial processes (automated), as well as for the manufacture of bathtubs.
200-B-118
It is a white isophthalic gel-coat, finish, rapid development of hardness, low HAPS, meets the requirements specified in the standard ANSI Z124.1,.2-1995, Secc. 6.1.1. It is used for the manufacture of sinks and plates in serial processes (automated), in addition, for the manufacture of bathtubs.
200-B-120
White isophthalic gel-coat, finishing, rapid development of hardness, lower styrene emission, meets the requirements specified in the ANSI Z124.1,.2-1995, Sect. 6.1.1. It is used for the manufacture of sinks and plates in serial processes (automated), in addition, for the manufacture of bathtubs.
200-B-121H
They are white isophthalic gel-coats, excellent flexibility, sanding and good resistance to runoff. Specially designed to be used in the manufacture of fiberglass tractor parts in open molding processes.
200-B-121W
They are white isophthalic gel-coats, excellent flexibility, sanding and good resistance to runoff. Specially designed to be used in the manufacture of fiberglass tractor parts in open molding processes.
200-BA-001
White isophthalic gel-coat for finishing. They are formulated for use in the manufacture of fiberglass parts in open molding processes.
200-BD-070
They are white isophthalic gel-coats, for finishing, rapid development of hardness, good resistance to runoff, and they meet the requirements specified in the ANSI Z124.1,.2-1995, Sect. 6.1.1. They are recommended for the manufacture of sinks and plates in serial processes (automated), as well as for the manufacture of bathtubs.
200-G-300
Isophthalic gray gel-coat, have excellent flexibility, sanding and tack free properties.Specially formulated to be used in manufacturing biber glass truck parts in open mold processes.
200-GI-009
They are gray isophthalic gel-coats, with very good flexibility, for finishing. Specially designed to be used in the manufacture of fiberglass parts for cooling towers in open molding processes.
200-NA-001
This gel-coat is black in tone, isophthalic, with a finish. It is formulated to be used in the manufacture of fiberglass parts in open molding processes.
200-XB-002
Neutral isophthalic finishing gel-coat, ready to be pigmented. It is used in the manufacture of fiberglass parts in open molding processes.
200-XD-001
It is a neutral isophthalic gel-coat, finishing, rapid development of hardness, meets the requirements specified in the ANSI Z124.1,.2-1995, Sect. 6.1.1. It is recommended for the manufacture of sinks and plates in serial processes (automated), also for the manufacture of bathtubs.
200-TA-001
It is a transparent isophthalic gel-coat for finishing. Designed for use in the manufacture of fiberglass parts in open molding processes.
200-B-127
Isophthalic white finish gel-coat, Developed under the ANSI Z124.1,.2-1995, Secc. 6.1.1. Specially formulated to be used in manufacturing fiberglass in open mold processes.
200-S-050
Off-white isophthalic gel-coats, finishing, rapid hardness development, meet the requirements specified in ANSI Z124.1,.2-1995, Sect. 6.1.1. They are recommended for the manufacture of sinks and plates in serial processes (automated), also for the manufacture of bathtubs.
200-B-117
It is a white isophthalic gel-coat, high viscosity, good flexibility, for finishing. Specially formulated for the manufacture of fiberglass parts in open molding processes, where the application is by brush.
220-B-117
It is a white isophthalic gel-coat, high viscosity, good flexibility, for finishing. Specially formulated for the manufacture of fiberglass parts in open molding processes, where the application is by brush.
250-G-307
250-G-307 and 250-G-307W are isophthalic, gray, sandable gel coats formulated for the fiberglass industry where good performance and flexibility are required.
300-T-800
ISO-NPG transparent gel-coats, finishing, fast release cycles, very good resistance to UV rays, reduction of yellowing in the box, meet the requirements specified in the ANSI Z124.1,.2-1995, Sect. 6.1.1. Formulated for the manufacture of sinks and plates in serial processes (automated), as well as for the manufacture of bathtubs.
300-T-8100
ISO-NPG transparent gel-coats, finishing, fast release cycles, very good resistance to UV rays, reduction of yellowing in the box, meet the requirements specified in the ANSI Z124.1,.2-1995, Sect. 6.1.1. Formulated for the manufacture of sinks and plates in serial processes (automated), as well as for the manufacture of bathtubs.
300-T-808W
They are transparent gel-coats ISO-NPG type, for finishing, fast release cycles, very good resistance to UV rays, decreased yellowing in the box, low HAPS, they meet the requirements specified in the ANSI Z124.1,.2 standard. -1995, Sec. 6.1.1. Specially formulated for the manufacture of sinks and plates in serial processes (automated), as well as for the manufacture of bathtubs.
300-T-809W
They are transparent gel-coats ISO-NPG type, for finishing, fast release cycles, very good resistance to UV rays, decreased yellowing in the box, low HAPS, they meet the requirements specified in the ANSI Z124.1,.2 standard. -1995, Sec. 6.1.1. Specially formulated for the manufacture of sinks and plates in serial processes (automated), as well as for the manufacture of bathtubs.
300-T-8101
ISO-NPG Gel-coat, is a transparent finish gel-coat with fast demolding cycles, superior weather resistance (UV rays), reduced yellowing in the box. Developed under the ANSI Z124.1,.2-1995, Secc. 6.1.1. Specially formulated to manufacture vanities, cover tops in automated manufacturing oerations, and also for bath tubs. 165:165
500-J-001
It is an orange isophthalic gel-coat, rapid hardness development, excellent gloss development. Specially developed for the manufacture of molds.
