COATINGS
Industrial Paints
COATINGS
Resins designed for the manufacture of Industrial paint. These resins offer excellent protection to a surface extending its resistance to wear and corrosion. In this section we have a great variety of resins that can fulfill all the market needs.
AV-926-X60
It has good properties in ovenable enamels, with nitrocellulose lacquers it has very short drying times, which allows it to handle the applied pieces quickly. In the backgrounds and two-component lacquers, they are characterized by their rapid stacking and sanding. It can be applied in: Nitrocellulose varnishes and lacquers with a high percentage of alkyd resin, quick-drying and easy-sanding fillers, primers and primers, two-component polyurethane varnishes and lacquers, ovenable enamels for general use.
AL-5301-50X
Fast air drying. Excellent color and gloss retention. Good resistance to gasoline and durability in any climate. Compatible with acrylic resins. Fast-drying enamels, automotive refinish in combination with acrylic resins. It is recommended to use a maximum of 30% acrylic resin to prevent the film from becoming too brittle.
AL-5301-60X
Fast air drying. Excellent color, hardness development and gloss retention, good gasoline resistance and all-weather durability. Resistance to the saline chamber. This resin is the same as Al-5301-50X. Fast-drying enamels, automotive refinish in combination with acrylic resins. It is recommended to use a maximum of 30% acrylic resin to avoid brittle films.
810-0097R
Good stability, good gloss on air and baked finishes, excellent hardness on baked finishes. It can be used on primers and glazes, air-dried or baked. In baking enamels, HMMM melamine is used to cross-link and obtain high hardness.
AC-26102-60X
Excellent properties of hardness, resistance and durability are obtained when it is reacted with aliphatic isocyanates. Very bright coatings are obtained, reducing the cost of repainting.
809-6124
Cut-chain alkyd resin supplied in xylene, designed for the manufacture of quick-drying industrial and architectural enamels.
AQM-0097
Chain stopped alkyd resins reducible in water, diluted in a butoxyethanol/sec-butanol (50/50)mix, have been developed for baking and air-dry systems, coil coating and industrial coating systems. These resins have an excellent gloss retention and corrosion resistance.
AQM-1091
Chain stopped alkyd resins reducible in water, diluted in a butoxyethanol/sec-butanol (50/50)mix with high solids, these resins are used on fast drying industrial enamels and corrosion resistance coatings for the metal general industry.
RE-363
Medium chain alkyd resin supplied in gasoline, good drying and stability with pigments, due to its high viscosity it supports large amounts of gasoline. Manufacture of architectural and industrial enamels and primers.
AQM-0091
Chain stopped alkyd resins reducible in water, diluted in a butoxyethanol/sec-butanol (50/50)mix with high solids, these resins are used on fast drying industrial enamels and corrosion resistance coatings for the metal general industry.
RE-350
Medium chain alkyd resin, due to its high viscosity it supports large amounts of naphtha, is compatible with maleic resins and has excellent brushability for the manufacture of architectural and industrial enamels.
910-0453
Water-reducible epoxy ester resin, with outstanding hardness, adherence and moisture resistance, especially for use in enamels for industrial maintenance with high resistance to corrosion.
3601-60XB
Alkyd copolymerized resin modified with vinyl toluene and supplied in xylene, soluble in naphtha with rapid drying and hardness development for use in architectural and industrial coatings.
RE-700
Copolymer Alkyd resin, styren monomer modified and diluted in Xylene. It is used for architectural and industrial coatings and fast drying aerosol paints.
AQM-110170
Epoxy Ester resin water reducible, has a great corrosion resistance, gloss and hardness. Used for manufacturing industrial coatings.
